1、Product introduction
Test pile design for multifunction testing pile,it is used for the detection of cathodic protection parameters,and it is a device for pipeline maintenance in indispensable ,according to test functional layout along the line .Test pale for the detection of pipeline potential ,current,insulation performance,the device is equipped with 6 terminals,it can easily compose of potential ,current,sacrificial anode,insulation performance test pale or cross pipe testing pile,etc.
The test pile is composed by several parts of a pile body ,test board,test leads and nameplate.
Classification of the test pile:
According to the material:can be classified as steel test piles,test piles of cement,steel test piles are divided into carbon steel test piles and stainless steel test piles.
2、Specification
Common test pile specification:
Type | Specification Length×Diameter×Wall thckness (length×wide×high) | Material |
CS-1 | 3000×Φ108×4 | Carbon steel |
CS-2 | 1800×Φ89×3 | Carbon steel |
CS-3 | 1200×120×120 | Stainess steel |
CS-4 | 1600×120×120 | Cement |
CS-5 | 1800×Φ89×4 | Glass steel |